TUTORIALS - UPDATE AND SETTING

  • Firmware and Viewers based on our models' type.


    Lukas Qvia AR790 Firmware - Click for file 

    For Window - Lukas Qvia AR790 Viewer - Click for file 

    For Mac - Lukas Qvia AR790 Viewer - Click for file 

    Lukas Qvia AR790 Instructional Guide - Click for PDF

    Lukas Qvia AR790 Setting Guide - Click for PDF

     How to Update your firmware
    1. Download the firmware above.
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.

    How to do the settings
    1. Download the PDF above.
    2. Download the Qvia AR790 Viewer, unzip it and insert your micro SD card.
    * If you wish to do the settings using computer.
    3. Do your setting through the viewer, remember to save it.

  • Firmware and Viewers based on our models' type.


    Lukas Qvia T790 Firmware - Click for file 

    For Window - Lukas Qvia T790 Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above.
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.


    How to do the settings
    1. Similar to the Qvia AR790. *For phone users, please check the AR790 tutorial 
    2. Download the Qvia T790 Viewer, unzip it and insert your micro SD card.
    * If you wish to do the settings using computer.
    3. Do your setting through the viewer, remember to save it.

  • Firmware and Viewers based on our models' type.


    Lukas LK9750 Firmware - Click for file 

    Lukas LK9750 Firmware OBD - Click for file 

    For Window - Lukas LK9750 Viewer - Click for file 

    For Mac - Lukas LK9750 Viewer - Click for file 

    For Window - Lukas LK9750 OBD Viewer - Click for file 

    For Mac - Lukas LK9750 OBD Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.

    How to do the settings
    1. Download the LK9x50 Viewer, unzip it and insert your SD card.
    * Using computer
    2. Do your setting through the viewer, remember to save it.
    3. Do it in your car with the touch screen on the dash cam
    * Using Touch Screen
    4. Please download the attached file with the link and load it in your SD card TOUCH SCREEN - Click for file  
    * If you have encountered the touch screen is not working, do not need to update the firmware 

  • Firmware and Viewers based on our models' type.


    Lukas LK9390 Firmware - Click for file 

    Lukas LK9390 Firmware OBD - Click for file 

    For Window - Lukas LK9390 Viewer - Click for file 

    For Mac - Lukas LK9390 Viewer - Click for file 

    For Window - Lukas LK9390 OBD Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.


    How to do the settings
    1. Download the LK9x90 Viewer, unzip it and insert your SD card.
    * Using computer
    2. Do your setting through the viewer, remember to save it.
    3. Do it in your car with the touch screen on the dash cam
    * Using Touch Screen
    4. Please download the attached file with the link and load it in your SD card TOUCH SCREEN - Click for file  
    * If you have encountered the touch screen is not working, do not need to update the firmware 

  • Firmware and Viewers based on our models' type.


    Lukas LK7700 Firmware - Click for file 

    For Window - Lukas LK7700 Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.

  • Firmware and Viewers based on our models' type.


    Lukas LK7900 Firmware - Click for file 

    Lukas LK7900 Firmware OBD - Click for file 

    For Window - Lukas LK7900 Viewer - Click for file 

    For Window - Lukas LK7900 OBD Viewer - Click for file 

    For Mac - Lukas LK9750 OBD Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.

  • Firmware and Viewers based on our models' type.


    Lukas Qvia R935 Firmware - Click for file 

    For Window - Lukas Qvia R935 Viewer - Click for file 

    For Window - Lukas Qvia R935 OBD Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.


    How to do the settings
    1. Download the R935 Viewer, unzip it and insert your SD card.
    * Using computer
    2. Do your setting through the viewer, remember to save it.
    3. Do it in your car with the touch screen on the dash cam
    * Using Touch Screen
    4. Please download the attached file with the link and load it in your SD card TOUCH SCREEN - Click for file  
    * If you have encountered the touch screen is not working, do not need to update the firmware 

  • Firmware and Viewers based on our models' type.


    Lukas LK7300 Firmware - Click for file 

    For Window - Lukas LK7300 Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.

  • Firmware and Viewers based on our models' type.


    Lukas LK9370 Firmware - Click for file 

    Lukas LK9370 Firmware OBD - Click for file 

    For Window - Lukas LK9370 Viewer - Click for file 

    For Mac - Lukas LK9370 Viewer - Click for file 

    For Window - Lukas LK9370 OBD Viewer - Click for file 

     How to Update your firmware
    1. Download the firmware above
    2. Unzip the downloaded file and load all files onto your SD card.

    (* If your dash cam has a single slot for microSD card "For AR790 and T790", load the firmware files onto your microSD card)
    3. With your vehicle ignition ON, insert the SD card back into your dash cam.
    4. As the dash cam starts, firmware update will begin automatically.
    5. The update is complete
    * Disconnecting the power supply to the dash cam during the update can severely
    damage the device. Make sure you do not turn off the power until the update is completely finished.


    How to do the settings
    1. Download the LK9x70 Viewer, unzip it and insert your SD card.
    * Using computer
    2. Do your setting through the viewer, remember to save it.
    3. Do it in your car with the touch screen on the dash cam
    * Using Touch Screen
    4. Please download the attached file with the link and load it in your SD card TOUCH SCREEN - Click for file  
    * If you have encountered the touch screen is not working, do not need to update the firmware